All projectsProject Case Study

Solving a Bonding Challenge: ALR's Work with Nano Ceramic

Laser Cleaning & Etching for Adhesive Bonding August 2024 Completed by Advanced Laser Restoration (Corporate)

Watch The Break Test

Owner-supplied footage of the on-site break test. Press play to watch with sound.

ALR used laser cleaning and etching to prepare the bonding surfaces on Nano Ceramic's injection-molded parts — and a break test just 20 minutes after bonding was unable to delaminate the laser-treated joint.

Targeted laser cleaning and etching helped address an adhesive bonding problem—and a break test just 20 minutes after bonding produced a compelling result. For Nano Ceramic, the challenge was at the joint. The company manufactures injection-molded parts that are subsequently glued together, including fiberglass-style hood components for UPS trucks. It was experiencing a debonding issue: the adhesive joints were not holding up as needed. Advanced Laser Restoration worked with Nano Ceramic to evaluate whether laser treatment of the bonding areas could help solve the problem. FOCUSING ON THE BONDING SURFACES ALR used laser cleaning and etching on the areas where the components would be joined, preparing those surfaces before adhesive application. The treatment targeted the bonding zones themselves. The images accompanying this case study show where the laser was applied, giving a clear view of the preparation performed before assembly. For this application, that preparation proved to be the difference. After laser treatment and bonding, the joined parts resisted the separation that had been causing problems. A BREAK TEST AFTER JUST 20 MINUTES The most striking moment came during testing. Although the adhesive's usual cure time was 24 hours, the team attempted a break test approximately 20 minutes after bonding the laser-treated parts. During that test, they were unable to get the bonded parts to delaminate. The accompanying video captures the attempt, showing how the joint performed at that early stage. It provided a compelling demonstration of the result achieved with laser cleaning and etching in this particular application. The test was an early demonstration of bond performance; the adhesive's specified cure time remains a separate part of the production process. ADDRESSING A SPECIFIC MANUFACTURING PROBLEM This project shows how laser cleaning can contribute to manufacturing beyond visible restoration. At Nano Ceramic, the objective was to improve the performance of an adhesive joint. By focusing on the surfaces being bonded, ALR helped identify a preparation method that addressed the debonding issue in the demonstrated parts. The value was practical and observable: a problem joint, a targeted treatment, and a test that showed a markedly different outcome. DEVELOPING APPLICATIONS THROUGH HANDS-ON WORK Advanced Laser Restoration continues to explore laser cleaning applications by working directly with customers on their actual materials and production challenges. The Nano Ceramic project is a strong example of that approach. Laser cleaning and etching helped turn a recurring bonding problem into a successful application demonstration, with photographs and video documenting the work. For manufacturers facing difficult surface preparation challenges, results like these show why testing the technology on the actual application matters. Have a bonding or surface preparation challenge? Contact Advanced Laser Restoration at 844-527-3799 or info@alrclean.com to discuss an application evaluation.

On Site

ALR laser cleaning and etching an injection-molded hood component at Nano Ceramic
Bonded bracket on a laser-prepared molded part at Nano Ceramic
Bracket held in place on a laser-treated bonding surface during the Nano Ceramic test
Adhesive joint on a molded component corner prepared with laser cleaning and etching
On-site footage of the ALR laser bonding application at Nano Ceramic
On-site footage of the ALR laser bonding application at Nano Ceramic
On-site footage of the ALR laser bonding application at Nano Ceramic

Images and video are shown for illustration. No safety, material-compatibility, regulatory or performance claims are implied.